Any damage about the teeth surfaces of the sprocket diminishes the daily life of your conveyor chain.
With traditional sprockets, substantially worn sprocket teeth were repaired by teeth padding or the total sprocket was replaced. In both case, fix was costly and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers to the dramatic cost savings in expense and time.
Structure
The teeth is often replaced by two methods: personal tooth replacement or sectional teeth replacement.
The bolts and nuts used for mounting the teeth on towards the sprocket are spot-welded to stop loosening.
The respective structures are illustrated over the right.
The above photo plus the prime correct illustration show a sprocket for personal tooth substitute. Since the joint face in between the replaced teeth as well as sprocket is formed in the exceptional arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Additionally, because the load acting around the mounting bolts is decreased, there exists significantly less probability of loosening. This sprocket development is patented.
There are actually two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for substantial sprockets getting heavy loads and welded sheet steel hubs for other applications.