1.A connecting hyperlink of an O-ring Chain for common application is pre-coated with grease with the pins. Just before connection, verify the grease over the surfaces of pins, and if your amount of grease is tiny, apply grease with bare hands. (If gloves are employed, the grease might be absorbed through the gloves.)
Example: When the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots on the pins. If your O-rings come loose due to vibration throughout transport, refit the O-rings in to the roots on the pins.
In this instance, be sure you return the grease collected on the roots on the pins towards the central surfaces from the pins, a lot more at portion A than at portions B proven inside the above illustration. (Portions A is worn as a result of sliding with all the bushings.)
two.The chain could be most conveniently connected on the teeth of the sprocket. Engage the backlinks at each ends of your chain with all the sprocket teeth and fit connecting pins. If your sprocket is usually moved, the chain may also be linked within the loosened side.
3. Connecting process
1.Confirm that O-rings are connected towards the roots on the pins.
2.In the event the volume of grease utilized about the connecting pins is tiny, coat the pins with grease with the central portions.
three.Insert the connecting pins into the bushings on the inner links at both ends.
4.Confirm that the grease is utilized to the entire face on the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, install the spring clip. Confirm whether or not the head (the end with no split) of your spring clip is turned during the feeding course of your chain. (See the next illustration.)
six.You’ll want to confirm the spring clip is securely fitted inside the clip grooves with the connecting pins.
This completes jointing of your connecting website link. Note that grease to the surfaces of connecting pins and O-rings may be eliminated in the course of installation get the job done. In this instance, re-grease utilizing the grease to the surface with the base chain or the grease within the polyethylene bag during which the connecting website link was contained.