Continuous Sleeve Series
Options
Simple and economical all steel form of gear coupling constructed having a single sleeve and 2 hubs
Comparatively basic installation
Precision reduce 20° pressure angle gear teeth with minimal backlash
Most conventional configurations are available as stock goods
Angular misalignment of 1/2° per gear mesh (flex-plane)
Sizes 7/8 through 12, to accommodate bore sizes up to and including 12.50 inches
Interference fit (normal) and Clearance fit on bores are available
Load Capacities vary from two,500 in-lbs up to 2,520,000 in-lbs
Patterns for applications requiring horizontal and vertical orientation, full-flex, flex-rigid, mill-motor, disengagement, sliding hubs, Shear Pin, floating shaft, and spacers
Patented and examined BUNA N seal design with reinforced washers bonded to your within edges which positively retain lubricant and seal the interior from outdoors contaminants
Reinforced rubber seals with snap rings to hold in lubricant
Two snap rings made of hardened spring steel which securely hold the coupling together, are uncomplicated to put in or take away, however withstand 100,000 pounds of end thrust
Inch and Metric bore sizes out there
Flanged Sleeve Series
Features
Patented tooth form for extended coupling life
Precision cut 20° pressure angle gear teeth with minimum backlash
All steel sleeves and hubs (stainless steel accessible)
Designs for applications requiring horizontal and vertical orientation
Most common configurations are available as stock objects
Angular misalignment of 1-1/2° per gear mesh (flex-plane) as much as size 5.5, 3/4° for sizes 6 and above
Coupling sizes obtainable by way of size 30 to accommodate bore sizes as much as and together with 44 inches
Interference fit (common) and Clearance match on bores are available
Load capacities vary from 7,600 in-lbs as much as 47,269,000 in-lbs
Exposed bolts regular on all sizes, shrouded obtainable by request up to size 6
Normal bolts supplied are taken care of to become corrosion resistant
Flanged sleeve couplings are interchangeable with marketplace specifications
Piloted gear match for increased speeds and less vibration
Labyrinth all steel seal style in FL series
Inch and Metric bore sizes readily available
Typical Styles and Sizes
Sier-Bath couplings are stocked in an assortment of configurations which contain C and F standard hubs and sleeves, Mill Motor hubs, Vertical design, Floating Shaft, and Spacer models. ’s exceptional engineering workers make it probable to support lots of added coupling varieties such because the Brakedrum variety, Sliding Hub kind, Shear Pin type, Jordan kind, and customized lengths for non normal shaft separations. Additional size ranges and patterns to meet uncommon application needs could also be manufactured by to meet market place demands. Materials can vary from normal steel to alloy steel and in some cases stainless steel. The outstanding simplicity in the coupling layout make this all probable.
Misalignment and End-Float Capability
The fundamental principle of Sier-Bath C and F variety couplings is similar to that of other conventional versatile gear couplings. Though it’s desirable to align shafts as accurately as you possibly can, the purpose of any flexible coupling would be to absorb probable angular, parallel, and axial (end-float) misalignment. Sier-Bath couplings employ a exclusive gear tooth geometry produced particularly to resolve difficulties with shaft misalignment and accommodate from 1/2° to 1-1/2° per gear mesh or flex plane. The hub teeth are thoroughly crowned to provide to get a larger contact area and reduce stresses below misaligned problems. The crowned tooth design also eliminates most of the end loading that happens on straight gear teeth below misalignment.