Gear Boxes For Rotary Cutter’s, Shredders, and Choppers
RC thirty Collection Gearbox, 40hp Rated, one-3/eight” SB input, 1-one/two” X 12 Spline Output. one:one.47 Ratio Replace your damaged rotary cutter gearbox with this substitution device. Why rebuild when you can substitute at such a reduced value? These gearboxes have been used by Worksaver, HawkLine, Worldwide, WAC, Big Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and several far more. Note: Genuine Gearbox may possibly have a rounded housing or sq. as shown, depending on present availability, all internal components are interchangeable and specs for each bins are equivalent! This gearbox characteristics a 1:1.forty seven Speed Up equipment ratio for use on 5′ and larger diameter rotary cutters. Market standard 1-three/eight” clean diameter input shaft with 1/2″ shear bolt hole and retaining ring groove and 1.fifty seven” diameter twelve tapered spline output shaft let fitment to most gentle, standard and medium responsibility rotary cutters. Each gearbox features high speed ball bearing units and heat taken care of gears and shafts to make sure lengthy life. Four bolt mounting matches industry standards. Every gearbox contains blade carrier mounting nut and cotter pin. Gearboxes are shipped dry and call for sixteen ounces of 80-90W gearlube or equal. Disclaimer: Any and all First Equipment Manufacturer’s (OEM) tradenames, logos, drawings, colors, descriptive data and portion figures are used for parts identification purposes only, and DN Gear, LLC (DN) is in no way implying that any particular areas are OEM parts. More, any use of the OEM’s tradenames, logos, drawings or element quantities by DN is made only to help DN’s consumers, in getting the suitable DN part or ingredient which will substitute the OEM’s portion.
rotary cutter gearbox