Material Handling Energy UNIT two
This energy unit capabilities electrical power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve using the decreasing pace controlled through the strain compensated flow management valve. Products of this series may be widely utilized in the industry of logistic units for example fork lift, mini lift table, etc.
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned prior to mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which must also be clean and free of impurities, N46 hydraulic oil is advised .
4. Oil altering is required right after the first a hundred operation hours,afterwards as soon as each and every 3000 hrs.
5. The electrical power unit must be mounted horizontally.
Materials Handling Power UNIT one
This energy unit is developed for the fork lift industry, consisting of highly efficient gear pump, DC motor, guide raise and lower valve, tank, ect. The up and down motion are controlled by the lever from the manual release valve, which is equipped with an electrical switch to activate the motor. The lowing speed is managed from the pressure compensated flow manage valve.
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic parts concerned in advance of installation of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil modifying is required following the initial one hundred operation hours, afterwards after each and every 3000 hrs.
five. The electrical power unit proven is made to be mounted horizontally.