Due to their style and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and thus avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive solution to impress you with its high level of performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP for you. These can be implemented separately in the modular program. In this way, they offer you an enormous range of sizes, equipment ratios and engine sizes.
However, their greatest power can be their running smoothness and their incredibly low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you are choosing a robust drive solution which you will hardly actually hear.
The overall concept also offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher performance of the helical-worm combinations instead of single helical-worm gear units. This is how you save additional energy in the procedure of your systems and so are in a position to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to fit your person requirements – with an array of AC motors. Furthermore, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits provided by this combination of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance can be achieved because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you already are saving money and time with this selection and project planning. The reason being our modular system enables a multitude of mixture options for gear models and motors. You can therefore reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that’s characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
Combine the helical-worm equipment unit with our AC motors:
Quiet and reliable transmission of torque
High overload capacity
helical worm gear motor hardened steel worm equipment and bronze alloy worm wheel provide exceptional sturdiness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft mount or flange mounted configurations
Right Angled gear units
High permitted overhung loads
Helical-worm Gearmotor S Series
Ever-Power helical-worm gear units are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Because of their outstanding effectiveness, these drives can be utilized in every commercial sector and customized to individual torque and speed requirements. The decrease ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel material with particular lubricants, optimized shape, this powerful motor achieves high levels of performance and torque. The housing machined on all sides allows diverse mounting options. Dual chamber shaft seals are used as standard.
The low contour design helps it be suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and floor worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, installation pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Helps to keep contaminants and water out.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to simply accept brakes, encoders or pressured cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new standards for reliability, efficiency and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration at this point and a truly future proof solution. The EP gear motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the motor frame providing for unparalleled integration possibilities.
EP gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series can be dirt tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the output shaft of the unit.
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique mixture of optimized worm wheel materials with unique lubricants and optimized form, this powerful geared engine achieves high degrees of effectiveness and torque. The reduced contour design helps it be suitable for implementing applications electronic.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The use of condition of the art helical and worm gear combinations affords optimum overall performance fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with most major manufacturer’s drives.
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Output flange kits
Torque arm kits
Output shaft kits
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Dual and triple reduction ratios
Flanged or foot mounted
All devices adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared electric motor. A favorably priced alternate for the standard duties expected of a right-angle drive.
5 gear sizes (S0 to S4).
Motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is upon the engine shaft. This integrated compact design can be an essential element for the high accuracy and the amazing stiffness of EP geared motors.
For vector-controlled inverter procedure use of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision ground. The worm wheels are made from special wear-resistant bronze. Helical worm gears include a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also part of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Functionality gearboxes in universal style. The housings are produced from top quality cast iron. The rugget wall space and internal ribbing ensure incredibly torsional stiff and noise dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with tough walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Basic mounting, flange mounting or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Free input shaft
ATEX specification according to directive 94/9/EG