All EPT shaft collars, including quick-clamping collars, are solo point faced to make sure perpendicularity and proper alignment. This critical manufacturing step assures precise shaft collar face to bore relationship leading to correct element positioning on the shaft and possibly pressure on interfaced pieces.
Quick-clamping shaft collars from EPT are produced from high quality aluminum with type-II sulfuric anodized finishes, with a dark-colored finish upon the collar and a gold finish in the clamping lever for added visibility. Aluminium collars are corrosion tolerant, lighter than other metals, have low inertia and also have nonmagnetic properties. All EPT items will be RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars will be 0.375” to at least one 1.5” in the in . series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is constructed of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and bigger axial load capability than setscrew or one-piece clamping collars. The two-piece style separates into two halves, allowing set up or repositioning everywhere on the shaft without disturbing existing factors. It accommodates a larger selection of shaft diameters than setscrew collars and is effective on both hard and smooth shafts. It is manufactured from metal for weldability and rust level of resistance with a black oxide surface finish for a ornamental appearance and level of resistance to white corrosion, chipping and flaking, and stick-slide of the screw during torqueing, bettering the collar’s grip on the shaft. Dark-colored oxide also provides moderate corrosion resistance and increased lubricity. This collar comes with forged socket-mind cap screws for securing the collar onto the shaft. The working temperatures for this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in a variety of applications, including in the motor vehicle industry to situate parts in automobile electric power steering assemblies, the production industry to locate parts on a conveyor belt program, and the hobby craft industry to hold tires on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on and off the shaft without the need to eliminate other ancillary elements. Clamps firmly in place when tightened to the shaft. Perfect for positioning elements such as bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly set up once tightened to the shaft. Perfect for positioning components such as bearings or sprockets onto shafts.
The double split shaft collar made of steel browned (clamp collar) is easy to mount. The shaft collars usually do not harm the shaft. They are also insensitive to external forces and vibrations and distribute the possessing forces evenly over the whole shaft circumference.
Clamp-style and set screw shaft collars from Grainger can be indispensable to power transmission. They are able to hold bearings and sprockets on shafts, situate pieces in motor and gearbox assemblies and serve as mechanical stops. A two-part clamping shaft collar may easily wrap around a difficult or soft shaft without marring. Arranged screw collars make use of a cup level socket set screw to lock onto a gentle or predrilled shaft.

The collar clamping mechanism works fast and successfully with simple side opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface of the collar. The look of the cam on the lever and the mating machined surface on the collar assure a good fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In situations where higher holding vitality is certainly or clamp axial load is necessary, the quick-clamping collar is not the recommended decision. EPT Clamping Shaft Collars offers a comprehensive type of industry-leading one-piece and two-part shaft collars created for these applications.