Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal, nylon, and aluminium are light-weight and corrosion resistant. Stainless is the most corrosion resistant.
Styles C, D, and J have a bracket on underneath for tying off one end of a rope.
Style K reduce the force needed to keep your load in place. Unlike standard pulleys, these possess a V-groove for more hold on your rope, plus they ratchet when under load therefore they don’t slip in the various other direction. Pulley for3/8″ dia. rope can be arranged to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Acetal and aluminum are light-weight and corrosion resistant. Galvanized metal is definitely more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless is usually more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a set surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys pertaining to Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to move the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum is certainly corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as block and tackle systems.They can reduce the force had a need to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or products over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Style E pulleys have bracket on the bottom that lets you tie off a single end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and tackle systems. They can reduce the force needed to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off a single end of a rope.
Warning: Never use to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never make use of to lift people or items over people.