DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit features a energy up energy down circuit with load holding on each A & B ports. A stress compensatred flow manage might be extra to circuit to regulate the decent pace on the cylinder.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned ahead of installation of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and no cost of impurities. N46 hydraulic oil is advisable.
four. The power unit ought to be mounted horizontally.
five. Check the oil degree within the tank immediately after the initial working from the energy unit.
six. Oil modifying is needed right after the first a hundred operation hours, afterwards the moment every 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
This energy unit features a power up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be presented if needed. Also a strain compen sated movement manage could be added to your circuit to manage the descent velocity with the cylinder.
Remark: Please talk to our product sales engineer for your diverse pump displacement, motor power or tank capability.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned prior to set up of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
4. The electrical power unit need to be mounted horizontally.
five. Check the oil level during the tank following the first working in the electrical power unit.
six. Oil shifting is required just after the original a hundred operation hours, afterwards once each and every 3000 hrs.